To solve the problem of wear and钝化 of the cutting edge of the laminating machine's cutter, we need to start from three aspects: emergency repair, daily prevention, and long-term optimization. The specific methods are as follows:
1. Emergency repair: Precision grinding to restore sharpness
After the blade becomes dull, avoid random manual grinding. A special blade grinder should be used to grind according to the original design angle of the knife to ensure the sharpness and consistency of the blade; after grinding, wipe it clean with a dry cloth, check for no burrs, and then install it for use.
2. Daily Prevention: Reduce Wear from the Source
Match Cutting Tools with Cutting Materials: Use cemented carbide/tungsten steel blades for hard materials (metal composite films, particle-containing coated paper), and high-speed steel blades for soft materials (ordinary paper products, soft films) to avoid the "small blade cutting hard materials" situation which exacerbates wear.
Standardize Operating Parameters: Adjust the pressure to just "cut off at one time without adhesion" and do not increase the pressure blindly; adjust the cutting speed according to the material, with slow cutting for hard materials and uniform speed for soft materials to reduce frictional heat on the blade edge.
Clean the Blade Edge in Time: Wipe off residual glue and dust with a special cleaning agent after each use to prevent adhesives from accelerating dulling and corrosion.
3. Long-term optimization: Strengthen the management and control of equipment and consumables
Regularly calibrate equipment: Fasten the tool holder and calibrate the guide rail to ensure the cutter runs smoothly without vibration, and prevent uneven force from causing unilateral wear.
Screen cutting materials: Avoid mixing hard objects such as gravel and metal chips into the materials to prevent accidental damage to the blade edge.





