How to Quickly Determine if Application Cases Align with Technical Common Sense? 4 Key Dimensions
To determine whether an application case aligns with technical common sense, the key is to examine whether it adheres to the fundamental principles of
materials, processes, working conditions, and parameters. These four simple dimensions enable quick screening and help avoid pitfalls.
1.Whether the material properties meet the requirements
★Core logic: Do not exceed the inherent attributes of the tool material (hardness, toughness, heat resistance, etc.).
★Criteria: For example, tools with average heat resistance should not be used for high-temperature cutting; tools with low toughness should avoid impact-based machining.
★Key check: Whether using materials with shortcomings to meet high demands, such as using tools that are not heat-resistant for high-temperature processing, is directly contrary to common sense
2.Does the Machining Process Match the Tool Type?
★Core Logic: Different processes (e.g., turning, drilling) have specific requirements for tools.
★Judgment method: For example, precision machining requires tools with sharp cutting edges, while "turning instead of grinding" for hard materials necessitates the use of superhard tools, as ordinary tools are not suitable.
★Key check: Ensure that the process requirements align with the tool capabilities, and avoid using incompatible tools for specific processes.
3.Are the operating conditions within the tool's tolerance range?
★Core logic: The cutting environment (dry/wet cutting, vibration, interrupted cutting, etc.) must match the tool's tolerance.
★Criteria: For example, tools that require cutting fluid for cooling should not be used in dry cutting without cooling measures; tools sensitive to impact should avoid intermittent cutting scenarios.
★Critical check: Whether process constraints are ignored, such as using tools susceptible to chemical reactions to process specific materials, which defies common sense.
4.Are the parameters and scenarios reasonably closed-loop?
★Core logic: Parameters such as cutting speed and lifespan must be mutually consistent and conform to physical laws.
★Criteria: For example, high-speed cutting generates high temperatures. If a tool with poor heat resistance is used without cooling measures, the parameters are unreasonable; wear volume and the number of processed parts must align with conventional norms.





