Nov 14, 2025 Leave a message

Instructions And Introduction To Forming Blades For Large Harvesters:

As a core component, the forming blade of large harvesters, with its scientific structure, high-quality materials, precision craftsmanship, and strict performance control, adapts to the harvesting needs of different crops, ensuring harvesting efficiency and quality.

20251114145450156691

Structure and Types

The structure consists of the cutting edge, back of the knife, and handle, each responsible for cutting, supporting and protecting, and fixing functions respectively, with each performing its own role.

Classified by harvested crops, low-stem crops are suitable for rotary tillage knives and weeding knives, while high-stem crops are suitable for combined harvesting blades and plow knives.

 

 

Material Selection

30MnB5 steel plate: Tensile strength 1000-1200MPa, yield strength ≥800MPa, elongation ≥10%. Thin plates are suitable for light-duty blades, and medium-thick plates are suitable for heavy-duty blades.

Composite material: The outer and inner layers are low-alloy high-strength structural steel, and the middle layer is martensitic stainless steel, which has the characteristics of strong toughness, high wear resistance and self-sharpening function.

Manufacturing Process

Hot-rolling forming process: The billet is hot-rolled into shape in one go after heating, processed through multiple procedures to maintain a continuous metal fiber structure, and then subjected to heat treatment in a high-frequency furnace to optimize hardness.

Cutting forming process: The composite blade is first made into a tube blank, which is then cut into shape after ring rolling and annealing heat treatment, and finally undergoes quenching and tempering to enhance performance.

 

20251114145514210331

 

20251114145452158691

Performance Requirements

Cutting performance: Efficiently cut various crops, reduce pulling and residue, and ensure smooth cutting.

Durability: Withstand frequent cutting operations, not easily subject to excessive wear, edge chipping or breakage, and have a long service life.

Safety: Meet safety standards, not loosen or fall off during work after installation, to ensure the safety of operators.

Surface treatment

The core method is polishing, with a surface roughness of Ra ≤ 1.6μm.

The purpose is to reduce erosion by moisture and chemical substances, and improve wear resistance and corrosion resistance in humid environments.

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry