Bosses who make canned food and cut vegetables all know that frequent sharpening and replacement of tools not only delay production but also increase consumable costs. In fact, it's not that the tools are of poor quality, but that they haven't found the right way to improve wear resistance. Here are 4 practical tips to extend the tool life by 2-3 times:
1.Choose the right material: For daily vegetables/soft meat, use 440C high-carbon stainless steel (50% more wear-resistant than 304); for bone-in/hard ingredients, use nitrided alloy knives; for assembly lines, use DLC diamond-like carbon coated knives (food-grade, non-stick and rust-proof).
2.Edge maintenance: Passivation treatment to grind an R angle of 0.01-0.05mm (doubling the service life), mirror polishing to Ra < 0.02μm (anti-adhesion and wear reduction).
3.Optimized operation: Vegetable cutting speed is 1-3m/s, hard materials 0.5-1m/s; no overloading, no forced pushing to avoid knife jamming; apply food-grade lubricating oil when cutting sticky ingredients.
4.Daily maintenance: After processing, clean with neutral detergent and dry. Check the blade edge daily. If there are small chipping, passivate them in time. Replace the knife when the fillet is greater than 0.1mm.





